Projects
PDF Print E-mail
R. Falco Iron Works Inc.

This gate was fabricated in 1998 for Mr. Joe Gemma in Johnston RI. The lions heads were installed by owner also electric gate operators were installed for automatic operation. The gate was hand bent, and all scroll work was hand done. There are 30 5/8 cast iron spear points from King Architectural Metals in Baltimore. Mr. Gemma became a steady customer of mine with many other projects to follow.

R. Falco Iron Works Inc.

This fence was fabricated for Universal construction in 2007 at the Centre of New England Condominiums in Coventry. This iron fence is constructed with 3/4 solid square bars, 3/4 spear points from King Architectural Metals. Support posts are 3" square tube with a cast iron cap. The raw steel was primed with Red Oxide Metal Primer and painted black with Sherwin Williams Industrial Enamel.

R. Falco Iron Works Inc.

This decorative iron and cast iron grill was fabricated for Bradford Design Inc. a loyal customer for 22 years. The builder of this unique home in Lincoln, RI in 2000. It consists of 2 corner castings, 2 double faced panels, 5 oak design castings, 10 oak design valance, 2 brownstone posts and 2 rosettes. The upper panel opens on hinges to access light bulbs in back.

R. Falco Iron Works Inc.

This railing was constructed with 316 grade stainless steel which is rust resistant to salt water. Each bar was individually curved by hand. All joints were t.i.g welded with 316 stainless welding rods. After fabrication all surfaces were hand polished with scotch brite pads of various grits. The installation consisted of being drilled and epoxied into cement blocks that were set on the property.